SCA 1200HT- User and Quick Start Guides
The SCA 1200HT Support Cleaning Apparatus by Oryx Additive is a specialized cleaning system designed for dissolving soluble support materials from 3D printed parts. This article combines essential setup, safety, usage, and maintenance instructions from the User Guide and Quick Reference Guide.
What It's Used For
The SCA 1200HT is used to clean 3D printed parts made from materials like ABS, PC, PLA, Nylon, and UV-cured resins by immersing them in heated water-based caustic solutions (e.g., WaterWorks, EcoWorks).
Quick Start Instructions
- Fill Tank: Use cool water and add an approved cleaning solution.
- Set Temperature: Choose from preset temperatures or select "Heat Off" for delicate materials.
- Set Timer & Preheat: Input cleaning time and allow the system to heat up.
- Load Parts: Place parts in the large or small parts basket and lower into the tank.
- Adjust Liquid Level: Ensure the level is correct to prevent alarms.
- Start Cleaning Cycle: Press the start button and monitor the cycle progress.
Maintenance & Safety
- Use only Oryx-approved solutions; never use hot water to fill the tank.
- Drain and clean the tank regularly and inspect filters and screens.
- Always wear heat-resistant gloves and eye protection when handling the system or cleaning solution.
Troubleshooting Highlights
- Flashing indicators may mean low or high liquid levels or temperature errors.
- Use the User Guide for full troubleshooting codes and instructions.
Support & Documentation
For more information, cleaning agents, or technical help, visit www.oryxadditive.com/support, email support@oryxadditive.com, or call 1-833-817-3533.
Related Articles
SCA 1200HT - Repair Manual
The SCA 1200HT Repair Manual by Oryx Additive is a comprehensive guide designed for the repair, maintenance, and troubleshooting of the SCA 1200HT Support Cleaning Apparatus. What It's Used For This manual is used to: Diagnose and fix common hardware ...Stratasys J5 Series User Guide
The Stratasys J5 Series User Guide offers detailed instructions for installing, operating, and maintaining the Stratasys J5 Series 3D printers, including models like the J5 MediJet, J5 DentaJet, and J5 Digital Anatomy. This guide is essential for ...Stratasys F123 Series User Guide
The Stratasys F123 Series User Guide is a detailed manual for operating, maintaining, and troubleshooting Stratasys F123 Series 3D printers, including the F120, F170, F270, and F370 models. What You'll Find Inside: Initial setup and installation ...Stratasys Support Center
The Stratasys Support Center is your comprehensive resource for technical support, product documentation, software downloads, and troubleshooting guidance for all Stratasys 3D printing systems. Key features include: Product Support: Access user ...Stratasys GrabCAD Print - Getting Started
This article will take you through the basic printing workflow using GrabCAD Print. The basic workflow is as follows: Insert models Arrange onto trays Adjust print settings Check for mesh problems Estimate or preview Click Print! Manage the queue 1 ...