S Line Printers
UltiMaker S Series Flooded Print Head - Causes, Prevention & Solutions
A flooded print head occurs when filament accumulates inside the print head during a failed print job. This often results in a large mass of hardened material around the print cores and can cause permanent damage to components. ? Issue Description A ...
How to Save UltiMaker S Series Log Files to USB
If you're experiencing issues with your UltiMaker S series printer, follow these steps to export log files and share them with support: Prepare a USB Drive: Before exporting, check the contents of your USB drive. If it already contains old log files, ...
ER58 – Material Station Could Not React to Material Movements
ER58 – Material Station Could Not React to Material Movements The ER58 error appears on UltiMaker printers equipped with a Material Station—specifically the S5, S7, S8, and Factor 4 models. It indicates that the Material Station was unable to respond ...
UltiMaker S Series - Cleaning the Print Cores
<br> If you notice signs of under-extrusion or the material has completely stopped extruding, this could indicate a clogged nozzle. In such cases, cleaning the print core is often an effective solution. Below is a step-by-step guide to help you ...
UltiMaker S Series - Head Replacement
Here's a step-by-step guide to removing and reassembling the printhead on your Ultimaker S5 or S3 machine: If you need to uninstall and reinstall the printhead on your Ultimaker S5 or S3, whether for maintenance or replacing the printhead, this ...