Epilog - CorelDraw Epilog Not Displaying in Driver Compatibility

Epilog - CorelDraw Epilog Not Displaying in Driver Compatibility

If Epilog Engraver is not displayed as a printer in the Driver Compatibility Menu, 

Go to: C Drive > Users > [Current User] (Show Hidden Files) > App Data > Roaming > Corel > Corel Draw Graphics Suite [Version]> Config > Corelprn

Scroll Down to [Driver-NT-Epilog Engraver Driver]. Copy and Paste These Settings Over the Current

ColorSeparations=0
ColorSettingsMode=0
ColorConvPerformBy=0
OutputColorAs=2
ColorContext=sRGB IEC61966- 2.1RgbRelativeColorimetric
ConvertSpot=0
ConvertSpotColorsType=0
PreserveNumbers=1
Overprint=1
RequestPageSize=0
AllTextAsGraphics=0
SoftwareFillClipping=0
DumpEntireBitmap=1
SendBeziers=1
DoBanding=0
CanMatchPageSize=1

    • Related Articles

    • Driver & Firmware Downloads

      Keeping your laser system up to date ensures the best performance, compatibility, and access to new features. The Epilog Laser Driver & Firmware Download page provides all the latest drivers, firmware updates, and utility software for your specific ...

    • Epilog Dashboard – Artwork Appears Off the Bed When Printed

      When printing from CorelDRAW or Adobe Illustrator to the Epilog Dashboard, your artwork may appear outside the engraving area and need to be dragged onto the bed. This happens when the document or artboard size doesn’t match the printer/page ...

    • Epilog - Zing 24 Laser Alignment

      CO2 laser alignment should be checked periodically to ensure the engraver is performing optimally. Download the Attached PDF for Detailed Instructions. Complete this procedure if any of the following behaviors are observed: Laser power appears weak ...

    • Epilog - Zing 16 Laser Alignment

      CO2 laser alignment should be checked periodically to ensure the engraver is performing optimally. Download the Attached PDF for Detailed Instructions. Complete this procedure if any of the following behaviors are observed: Laser power appears weak ...

    • 17000 (Maker Edge Pro) - CO2 Laser Alignment

      Introduction In this article we’ll walk you through aligning the laser on the Epilog Fusion Edge & Fusion Pro. During this procedure, all persons present in the room must be equipped with eye protection, such as safety glasses, eyeglasses or goggles. ...