Epilog Helix - System LCD error = Sys PleaseR or Please Reboot.

Epilog Helix - System LCD error = Sys PleaseR or Please Reboot.

It could be a controller or laser tube.
  1. Turn off the machine and unplug the ethernet connector on the laser tube. Then reboot. If the error still exists with the tube ethernet disconnected, the controller needs to be replaced.
  2. Turn off machine and unplug ethernet connector on the laser tube. Then reboot. If the error goes away with tube ethernet disconnected, the tube needs replaced. Or you can try to blow out connector with compressed air and reseat. This may fix the issue without replacing the tube. Otherwise the tube will need replaced.

    • Related Articles

    • Epilog - Mini, Helix Laser Alignment

      CO2 laser alignment should be checked periodically to ensure the engraver is performing optimally. Download the Attached PDF for Detailed Instructions. Complete this procedure if any of the following behaviors are observed: Laser power appears weak ...

    • 17000 (Maker Edge Pro) - CO2 Laser Alignment

      Introduction In this article we’ll walk you through aligning the laser on the Epilog Fusion Edge & Fusion Pro. During this procedure, all persons present in the room must be equipped with eye protection, such as safety glasses, eyeglasses or goggles. ...

    • Epilog Laser Knowledge Base

      The Epilog Laser Knowledge Base is your go-to resource for troubleshooting, FAQs, product documentation, and expert how-to articles. Whether you're setting up your machine, adjusting settings, or resolving common issues, the knowledge base provides ...

    • Epilog Laser Training Portal

      The Epilog Laser Training Portal is designed to help both new and experienced users get the most out of their laser systems. With a library of in-depth video tutorials, this platform offers step-by-step instruction on everything from basic setup to ...

    • Epilog Laser Sample Club

      Looking for creative laser project ideas? The Sample Club by Epilog Laser offers a library of free project files and step-by-step guides to help you explore new materials, techniques, and applications for your laser system. Each project includes: ...