Epilog Lasers | Fusion Pro 48/32

Fusion Pro 48/32
16000 (Fusion Pro 32 & 48) - Autofocus Plunger (AFP) Replacement
Parts Required CS0114 - Assy, Auto Focus Plunger Tools/Materials Required 5/64” Allen Wrench T7 Torx Driver Autofocus Plunger (AFP) Replacement AFP Removal 1. Turn off the engraver. 2. Disconnect engraver from power source. 3. Remove the nine (9) ...
16000 (Fusion Pro 32 & 48) - Leveling the Table
Download the Attached Document for Detailed Instructions: Table level should be checked periodically to ensure that all areas of the table are the same distance from the focusing lens. If all areas of the table are not the same distance from the ...

Epilog Lasers | Fusion Pro 48/32 | Knowledge Base