Roland BN2-20 - Pre-Install Checklist

Roland BN2-20 - Pre-Install Checklist

Before scheduling installation or training for your Roland BN2-20 desktop printer/cutter, please ensure all required utilities, RIP station setup, and workspace conditions are met.

✅ Power Requirements

  • ✔️ Voltage: 120V AC
  • ✔️ Requires a standard grounded outlet (no special circuit needed)
  • ✔️ Do not use extension cords or power strips

✅ RIP Station & Software Requirements

  • ✔️ Windows 10 or newer (64-bit) PC or Mac OS 13 or newer required for RIP station: Roland VersaWorks 7 Specifications
  • ✔️ Register and install DG Connect for printer software access: DG Connect Registration Page
  • ✔️ Roland VersaWorks 7 RIP software must be installed
  • ✔️ Administrative access required for all installations
  • ✔️ Coordinate with your IT department to allow proper installation and networking access

✅ Network Connection

  • ✔️ Ethernet connection is required – Wi-Fi and USB are not supported
  • ✔️ Ensure a nearby active network drop or switch port is available
  • ✔️ Printer supports DHCP or Static IP address assignment
  • ✔️ IT support must be available to assist with firewall permissions and IP configuration

✅ Media Handling & Clearance

  • ✔️ Machine Dimensions (W x D x H): 39.6" × 22.2" × 15.0"
  • ✔️ Minimum tabletop space: 48" W × 30" D
  • ✔️ Allow 12" clearance in front and back for media feeding and access
  • ✔️ Requires a sturdy, level table that can support 85 lbs

✅ Ink & Media Preparation

  • ✔️ BN2-20 uses Roland DG Eco-Sol MAX 2 Ink (CMYK)
  • ✔️ Inks should be stored at 60–80°F and loaded at room temperature
  • ✔️ Prepare at least one roll of 20" media for setup and testing

✅ Environmental Conditions

  • ✔️ Temperature: 64–90°F (18–32°C)
  • ✔️ Humidity: 35–80% RH (non-condensing)
  • ✔️ Avoid dust, direct sunlight, and areas with EMI (electromagnetic interference)

Once all items on this checklist are complete, please contact our support team to schedule installation and training.


    • Related Articles

    • Roland VersaSTUDIO BD-8 - Pre-Install Checklist

      Before scheduling installation or training for your Roland VersaSTUDIO BD-8 UV flatbed printer, please ensure all required utilities, RIP station setup, and workspace conditions are met. ✅ Power Requirements ✔️ Voltage: 120 VAC ✔️ Standard grounded ...

    • Roland TrueVIS VG3-540 – Pre-Install Checklist

      Before scheduling installation or training for your Roland TrueVIS VG3-540 large-format printer/cutter, please ensure all required utilities, RIP station setup, and workspace conditions are met. ✅ Power Requirements ✔️ Voltage: 120V AC ✔️ Recommended ...

    • Fixing Incorrect Media Width Reading on Roland TruVis Printers

      Applies to: Roland SG, VG, SG2, SG3, VG2, VG3 models Issue When using shorter rolls of media, the printer may incorrectly read the media width as wider than it actually is. This happens when the pinch roller with the blue mark is positioned outside ...

    • Roland Printer Summer Break Preparation

      As summer break approaches, it's essential to plan ahead for your Roland printer to ensure it's ready to perform when you return. Extended periods of inactivity are not ideal for these machines—even a few weeks without circulation can lead to clogged ...

    • Roland DGA - Replacing a Captop SG/VG

      Introduction: Ensuring consistent and high-quality prints is essential for any printing operation. One crucial component in achieving this goal is the cap top, which plays a vital role in preventing ink clogs and maintaining the integrity of your ...