Roland VersaSTUDIO BD-8 - Pre-Install Checklist
Before scheduling installation or training for your Roland VersaSTUDIO BD-8 UV flatbed printer, please ensure all required utilities, RIP station setup, and workspace conditions are met.
✅ Power Requirements
- ✔️ Voltage: 120 VAC
- ✔️ Standard grounded outlet required (no special circuit)
- ✔️ Do not use extension cords or power strips
✅ RIP Station & Software Requirements
- ✔️ Windows 10 or newer (64-bit) PC or Mac OS 13 or newer required for RIP station: Roland VersaWorks 7 Specifications
- ✔️ Register and install DG Connect for printer software access: DG Connect Registration Page
- ✔️ Roland VersaWorks 7 RIP software must be installed
- ✔️ Administrative access required for all installations
- ✔️ Coordinate with your IT department to allow proper installation and networking access
✅ Network Connection
- ✔️ Ethernet connection is required – Wi-Fi and USB are not supported
- ✔️ Ensure a nearby active network drop or switch port is available
- ✔️ Printer supports DHCP or Static IP configuration
- ✔️ IT support must be available to assist with firewall permissions and IP setup
✅ Workspace & Clearance
- ✔️ Machine Dimensions (W x D x H): 38.6" × 31.8" × 20.5"
- ✔️ Allow minimum 48" W x 36" D tabletop space
- ✔️ Front and rear clearance: 12" minimum for media loading and operator access
- ✔️ Requires a sturdy table that supports 130 lbs (machine weight)
✅ Ink & Media Preparation
- ✔️ BD-8 uses Roland EUV5 UV inks (CMYK + White and Gloss options)
- ✔️ Store inks between 60–80°F and load at room temperature
- ✔️ Prepare rigid or flexible flat media (up to 11.02" x 8.26" and 4" thick)
✅ Environmental Conditions
- ✔️ Temperature: 68–90°F (20–32°C)
- ✔️ Humidity: 40–70% RH (non-condensing)
- ✔️ Avoid dust, direct sunlight, high-EMI areas, or extreme ventilation
Once all items on this checklist are complete, please contact our support team to schedule installation and training.
Related Articles
Roland BN2-20 - Pre-Install Checklist
Before scheduling installation or training for your Roland BN2-20 desktop printer/cutter, please ensure all required utilities, RIP station setup, and workspace conditions are met. ✅ Power Requirements ✔️ Voltage: 120V AC ✔️ Requires a standard ...Roland TrueVIS VG3-540 – Pre-Install Checklist
Before scheduling installation or training for your Roland TrueVIS VG3-540 large-format printer/cutter, please ensure all required utilities, RIP station setup, and workspace conditions are met. ✅ Power Requirements ✔️ Voltage: 120V AC ✔️ Recommended ...Roland DGA -Troubleshooting Printing Issues with Roland VersaSTUDIO BT-12
Are you experiencing printing issues with your Roland VersaSTUDIO BT-12? Don't worry, we've got you covered. Here are some common problems you might encounter and how to resolve them. Problem: Faint or Uneven Printing Possible Causes: Unclean ...Fixing Incorrect Media Width Reading on Roland TruVis Printers
Applies to: Roland SG, VG, SG2, SG3, VG2, VG3 models Issue When using shorter rolls of media, the printer may incorrectly read the media width as wider than it actually is. This happens when the pinch roller with the blue mark is positioned outside ...Roland DGA - Resolving Color Discrepancies when Printing from Adobe Illustrator with VersaSTUDIO BT-12
In the vibrant community of Versa STUDIO BT-12 owners, users frequently engage in the Facebook BT-12 Users Group to share ideas and feedback and even troubleshoot issues. Recently, a user encountered a color problem while printing from Adobe ...